physical characteristics 5 standard specifications toroidal power inductors aigt-10, -20 series part l 1,2 i dc dcr physical characteristics 5 number 4 m h a w lead n a b c d e f aigt-10 (max) (max) diameter (max) -5-2.5 5 2.5 0.03 0.02 (0.5) 0.25 (6.4) 0.34 (8.6) 0.58 (14.7) 0.64 (16.3) 0.29 (7.4) 0.11 (2.8) 0.25 (6.4) -25-2.5 25 2.5 0.04 0.02 (0.5) 0.25 (6.4) 0.34 (8.6) 0.58 (14.7) 0.64 (16.3) 0.29 (7.4) 0.11 (2.8) 0.25 (6.4) -50-2.5 50 2.5 0.07 0.02 (0.5) 0.33 (8.4) 0.45 (11.4) 0.65 (16.5) 0.73 (18.5) 0.32 (8.1) 0.15 (3.8) 0.25 (6.4) -100-2.5 100 2.5 0.10 0.02 (0.5) 0.34 (8.6) 0.45 (11.4) 0.83 (21.1) 0.94 (23.9) 0.41 (10.4) 0.15 (3.8) 0.25 (6.4) -35-2.5 35 2.5 0.04 0.02 (0.5) 0.34 (8.6) 0.45 (11.4) 0.65 (16.5) 0.73 (18.5) 0.32 (8.1) 0.15 (3.8) 0.25 (6.4) -70-3.0 70 3.0 0.05 0.02 (0.5) 0.36 (9.1) 0.45 (11.4) 0.83 (21.1) 0.96 (24.4) 0.41 (10.4) 0.15 (3.8) 0.25 (6.4) -145-3.0 145 3.0 0.09 0.02 (0.5) 0.47 (11.9) 0.60 (15.2) 0.95 (24.1) 1.06 (26.9) 0.47 (11.9) 0.22 (5.6) 0.25 (6.4) -285-3.0 285 3.0 0.14 0.02 (0.5) 0.55 (14.0) 0.70 (17.8) 1.25 (31.8) 1.30 (33.0) 0.62 (15.7) 0.25 (6.4) 0.25 (6.4) -100-3.5 100 3.5 0.04 0.03 (0.8) 0.50 (12.7) 0.60 (15.2) 0.95 (24.1) 1.06 (26.9) 0.47 (11.9) 0.22 (5.6) 0.25 (6.4) -165-4.0 165 4.0 0.07 0.03 (0.8) 0.56 (14.2) 0.70 (15.2) 1.25 (31.8) 1.33 (33.8) 0.62 (15.7) 0.25 (6.4) 0.25 (6.4) -40-4.0 40 4.0 0.03 0.03 (0.8) 0.38 (9.7) 0.45 (11.4) 0.83 (21.1) 0.94 (23.9) 0.41 (10.4) 0.15 (3.8) 0.25 (6.4) -100-5.0 100 5.0 0.04 0.04 (1.0) 0.60 (15.2) 0.70 (17.8) 1.25 (31.8) 1.37 (34.8) 0.62 (15.7) 0.25 (6.4) 0.25 (6.4) -55-5.0 55 5.0 0.02 0.04 (1.0) 0.51 (13.0) 0.60 (15.2) 0.95 (24.1) 1.07 (27.2) 0.47 (11.9) 0.22 (5.6) 0.25 (6.4) -55-7.0 55 7.0 0.02 0.05 (1.27) 0.61 (15.5) 0.70 (17.8) 1.25 (31.8) 1.44 (36.6) 0.62 (15.7) 0.25 (6.4) 0.25 (6.4) -250-10.0 250 10.0 0.20 0.02 (0.5) 0.34 (8.6) 0.45 (11.4) 0.83 (21.1) 0.96 (24.4) 0.41 (10.4) 0.15 (3.8) 0.25 (6.4) part l i dc dcr physical characteristics 5 number 4 m h a w lead n a b c d 2e f aigt-20 (max) (max) diameter (max) -20-1.0 20 1.0 0.062 0.02 (0.5) 0.32 (8.1) - - 0.35 (8.9) - 0.50 (12.7) 0.22 (5.6) -20-2.0 20 2.0 0.029 0.02 (0.5) 0.46 (11.7) - - 0.50 (12.7) - 0.50 (12.7) 0.24 (6.1) -20-5.0 20 5.0 0.020 0.03 (0.8) 0.87 (22.1) - - 0.94 (23.9) - 0.50 (12.7) 0.57 (14.5) -50-1.0 50 1.0 0.061 0.02 (0.5) 0.56 (14.2) - - 0.60 (15.2) - 0.50 (12.7) 0 .30 (7.6) -50-2.0 50 2.0 0.025 0.03 (0.8) 0.78 (19.8) - - 0.85 (21.6) - 0.50 (12.7) 0.45 (11.4) -50-5.0 50 5.0 0.021 0.04 (1.0) 1.21 (30.7) - - 1.25 (31.8) - 0.50 (12.7) 0 .67 (17.0) -50-7.0 50 7.0 0.013 0.05 (1.27) 1.39 (35.3) - - 1.50 (38.1) - 0.50 (12.7) 0 .57 (14.5) -50-10.0 50 10.0 0.016 0.05 (1.27) 1.69 (42.9) - - 1.80 (45.7) - 0.50 (12.7) 0 . 70 (17.8) -100-1.0 100 1.0 0.085 0.02 (0.5) 0.58 (14.7) - - 0.62 (15.7) - 0.50 (12.7) 0.42 (10.7) -100-2.0 100 2.0 0.040 0.03 (0.8) 0.88 (22.4) - - 0.95 (24.1) - 0.50 (12.7) 0.60 (15.2) -100-5.0 100 5.0 0.028 0.04 (1.0) 1.42 (36.1) - - 1.50 (38.1) - 0.50 (12.7) 0 .57 (14.5) -150-5.0 150 5.0 0.042 0.04 (1.0) 1.67 (42.4) - - 1.75 (24.5) - 0.50 (12.7) 0 .68 (17.3) -250-1.0 250 1.0 0.168 0.02 (0.5) 0.76 (19.3) - - 0.80 (20.3) - 0.50 (12.7) 0 .45 (11.4) -250-2.0 250 2.0 0.070 0.03 (0.8) 1.18 (30.0) - - 1.25 (31.8) - 0.50 (12.7) 0.67 (17.0) -500-1.0 500 1.0 0.276 0.02 (0.5) 0.88 (22.4) - - 0.92 (23.4) - 0.50 (12.7) 0 .57 (14.5) -500-2.0 500 2.0 0.147 0.02 (0.5) 1.40 (35.6) - - 1.45 (36.8) - 0.50 (12.7) 0.55 (14.0) notes: 1. inductance (l) measured @ 20khz, 100mv rms @ rated i dc 2. inductance (l) tolerance: @ 20% 3. operating temperature: -30 o c to 130 o c 4. mounting: add ?v?, ?h? or ?b? as suffix 5. dimensions: inches / mm; see spec sheet for tolerance limits 6. specifications subject to change without notice 87 29 journey ? aliso viejo, ca 92656 ? usa (949) 448-7070 ? f ax : (949) 448-8484 e- mail : abinfo @ abracon.com ? i nternet a ddress : ww w . abracon.com abracon is iso 9001 / q s 9000 certified abr a con ? corporation
|